With the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers! The solution is our MXLR Front Body Support V2 for the Awesomatix A800R / A800RR which:
- prevents deflection of the bodyshell under higher speeds
- reduces the risk of cracking the front wheel arches of the bodyshell
The result is an extended lifetime of your bodyshells combined with better performance on the track as the shell will stay in its original shape and produce more downforce!
Our MXLR Front Body Support V2 is made from high quality plastic, including some laser engraving on both sides.
In the design process we took special care about the A800R / A800RR front bulkhead design and the importance of "flex" in this area. Our Front Body Support is designed to have the least flex influence possible!
For the installation we recommend:
- 2x SB3X7AL Alloy Screws from Awesomatix (not included), or any other 7-8mm long M3 screw to install the Body Support on the front bumper plate.
- 1x SB3X5AL Alloy Screw from Awesomatix (not included), or any other 5mm long M3 screw, to set the Front Body Support to the correct height! The screw should touch the hood without additional free play when the bodyshell itself is resting on the front bodypost clips/O-rings.
Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.
MAX-09-028 contains:
1x Front Body Support for Awesomatix A800R / RR