HPI Vorza S Flux Buggy 1/8 4WD ARTR Brushless RC

  • Sale
  • Regular price $599.99
Shipping calculated at checkout.

The RTR Vorza S FLUX chassis features a wide range of excellent features, esteemed performance heritage, amazingly powerful motor and speed controller combination, complete adjustability in the suspension and a tunable drivetrain, if you want to experiment to tune your Vorza S FLUX to your liking.

The S Spec adds 7075 aluminum chassis plate, 7075 front and rear shock towers, 7075 front and rear suspension hangers at both ends and 16mm big bore shocks with threaded body, top cap, lower seal cap and spring adjuster all in high quality aluminum! They also include a HD version of the 4mm shock shaft!

Factory-assembled & pre-painted 4WD 1/8 scale Car
NEW Pre-painted body with awesome speed graphics
Pre-mounted all-terrain tires
High torque IP67 rated waterproof servo
6S LiPo Capable
MLH-2200 2200KV brushless motor with 5mm shaft
Waterproof 150A ELH-6S speed controller
LiPo ready adjustable battery tray with secure hook-and-loop straps
Aluminum heatsink motor mount help the motor stay cool with optional fan mounting points
Full-time 4WD for excellent control
Efficient and tough shaft drivetrain with front universals
Aluminum 16mm Big Bore oil-filled shocks for confident control
7075 Aluminum shock towers front and rear
7075 suspension blocks front and rear
Thick steel turnbuckles
Front and rear sway bars for excellent handling
Hardened steel spur and pinion gear for extreme durability
Spiral-cut bevel gears for the best balance of strength and efficiency
Tough oil-filled 4-gear differentials
Suspension based on World Championship pedigree
Super low CoG for superior handling
Total adjustability: roll centre, wheelbase, camber, sway bar and more
Nylon stone and dirt guards keep rocks out of the chassis
Dual bellcrank steering
Cam type servo saver
All hex head hardware
Full set of rubber-sealed ball bearings
2.4GHz Radio Set with waterproof receiver
Enclosed receiver box


  • 2 matching Battery Packs with T-Plugs - HPI Plazma Li-Po batteries recommended!
  • Battery Charger
  • 4 AA Batteries for Transmitter



  • Length: 508mm; Width: 205mm; Height: 178mm; Wheelbase: 325mm
  • Drivetrain: Shaft 4WD
  • ESC ELH-6S: Input Voltage: 3-6S LiPo; Continuous Current: 150A; Motor Limit: 4S LiPo <3000kV, 6S <2400kV; 6V/3A Switching BEC; T-Plug
  • Motor FLUX MLH-2200: 2200kV; 6.5mm Bullet Connector; 12 Gauge Wire; 5mm Motor Shaft
  • 2.4Ghz FHSS TF-50 Transmitter: Servo Reverse; EPA; Trims and Dual Rate switches.