Built on the race-proven Speck platform, the Speck-SCT shares more than 50% of its components with the Speck-B while introducing purpose-built short-course upgrades, including new front and rear shock towers, redesigned bumpers, a clipless front body mount, a chassis stretched by 13.5mm, longer side rails, and an upgraded 37T 050 brushed motor for improved drivability and punch.
But the Speck-SCT isn't just built for the track. Influencers, media partners, and real-world drivers have already proven that the Speck platform can take serious punishment both on and off the racing line. From concrete skatepark abuse with RC Driver Online, to hands-on testing with SMRC, to big-air bashing sessions with Fil at Poor Boys RC, the verdict is clear: the Speck series may be one of the best budget-friendly bashers in the RC hobby today.
Starting at just $109.99 for the brushed version and $149.99 for the brushless edition, the Speck-SCT is built for everyone—from first-time drivers to seasoned racers, backyard bashers to competitive enthusiasts. Compact, scale-correct, durable, and ready for action, the Speck-SCT brings the golden era of short-course racing into the palm of your hand.
Key Features:
Aluminum LWB chassis with 20-degree front kick-up
Adjustable roll-center and weight-distribution bias settings
Oil-filled, threaded-body shocks
New-geometry long-travel suspension setup
New V-Blox SC multi-terrain performance tires
Versatile 7075-T6 aluminum motor plate, compatible with up to 050-size brushed and 1626-size brushless motors
Brushed version reaches up to 13 mph out of the box
Brushless version reaches up to 20 mph out of the box
Versatile battery compartment with common plug compatibility for easy-to-source optional batteries, including hard-case racing batteries
Hybrid metal/plastic geared transmission
Sealed 3-gear differential
Heavy-duty metal outdrives and dogbones
Common wheel offset, diameter, and hex size for easy tire and wheel compatibility
Precision steering setup with integrated servo saver
Low-CG chassis and optimized component layout
High-impact, crash-resistant design throughout
Full ball-bearing-supported drivetrain and rolling platform
Steel ball studs
Oversized high-output motor options:
Brushed: 37T 050 motor
Brushless: 1626-size 8000KV sensorless motor
All-hex hardware throughout
Optional upgrade parts available
Ready-to-Run Convenience
Out of the box, this platform is fully ready to run—just charge the included battery and install user supplied AAA batteries in the transmitter.
Key convenience features include:
User manual that holds key safety briefings exploded parts views and a complete replacement parts and spare parts listing. Read before operating!
2S 7.4V 350mAh LiPo battery
USB charger for easy charging anywhere
Water-resistant electronics
Easy-access battery compartment for quick swaps
Common 7mm wheel hex
Fly SKY ESC 2S
A stout .050 37T Brushed Motor
FlySky Radio System
Vehicle Specifications:
Total Length: 218mm
Width: 112mm
Height: 80.5mm at full droop
Wheelbase: 133.5
Weight: 225 grams
Clearance: 17.5mm at full droop
Drivetrain: 2wd
Shocks: Oil-filled Coil Springs, Threaded
Front Wheel: OD 42mm X 17mm x 10.4mm, 7mm Hex
Rear Wheel: OD 42mm X 17mm, 7mm hex
Tires: Super Soft Sidepin Aggressive Pin Design
Electronics Specifications:
Transmitter TX: FlySky 2.4ghz 2-channel
RX: FLYSKY 2ch ESC/RX combo (PPX4 grade water resistant)
Protocol: 2A-BS
Battery: 7.4v 2S LiPo 350mah
ESC: FlySky ESC/RX Combo. 2S Maximum. Brushless Ready by adding an BL ESC and Motor.
Power Plug: PH 2.0
Balance Plug and USB Charge Plug: JST-XH 2S
Motor: .050 37 Turn
USB Charger: USB with indicator. Red for Charging, Blinking Red is battery fault, Off or Green is charged.
Steering Servo: 5G
Standard Ratio:
Pinion Gear Spur Gear FDR 11T0.5M 45T0.5M 14.03:1 12.85:1
Optional Ratio:
Pinion Gear Spur Gear FDR
12T0.5M 45T0.5M 12.85:1 13T0.5M 45T0.5M 11.87:1
11T0.5M 42T0.5M 13.09:1
12T0.5M 42T0.5M 12:1
13T0.5M 42T0.5M 11.07:1