Konect Products are designed and developed in France!
Konect programming card settings:
• The operating mode: forward + brake – forward + reverse + brake
• The drag brake: from 0 to 40%
• The cut-off voltage: from 2.8V to 3.4V per cell or no protection
• The punch at startup: Level 1 to 4
• Braking force: 25, 50, 75 or 100%
OPERATION
Press the “ITEM” button to select the programmable items
in a loop. The serial number of the programmable items will
be shown by 2 digit LEDs marked with “ITEM”, and the
current option corresponding to the selected programmable
item will be shown by another digit LED marked with
“VALUE”. Press the “VALUE” button to choose the
parameter value you need.
After that, press the “OK” button, a bright “－” symbol
appears, that means the new setting is accepted and stored
in the ESC.
The “RESET” button is used for restoring all the items of the
ESC to the default settings.