Bulletproof Your Kyosho MP11: Premium Carbon Upgrades from Bermco RC Parts

The Kyosho Inferno MP11 is already a dominant force on the track.. Out of the box, it’s an engineering masterpiece, providing one of the best handling buggies available. But if you want to shave critical weight, stiffen your chassis for high-bite tracks, and dial in razor-sharp handling, carbon fiber is the next logical step.

We’ve rolled out a complete line of precision-cut carbon fiber upgrades from Bermco RC Parts designed specifically for the MP11 and MP11e platforms. Whether you need to eliminate flex in your steering assembly or survive massive triple-jump landings, these upgrades deliver the strength-to-weight ratio you need to shave tenths off your lap times.

Here is a breakdown of the essential Bermco carbon upgrades to take your MP11 to the next level.

The Ultimate Suspension Support

1. 5mm Carbon Front Shock Tower

When you are pushing hard on a blown-out dirt track, your front shock tower takes an absolute beating. Our front tower is cut from massive 5mm thick carbon fiber to prevent bending during hard nose-dives and cartwheels.

• The Benefit: Maintains perfect suspension geometry and shock alignment under extreme stress.

• Shop Now: Bermco 5mm Carbon Front Shock Tower

2. 4mm Carbon Rear Shock Tower (E-Buggy)

Tailored specifically for the MP11 E-Buggy, this rear tower utilizes a 4mm carbon weave. It provides the exact balance you need—dropping significant weight from the highest point of the chassis to lower your center of gravity, without sacrificing structural integrity.

• The Benefit: Reduces top-heavy roll in the corners and keeps your rear shocks perfectly dialed.

• Shop Now: Bermco 4mm Carbon Rear Shock Tower

Dialing In Your Chassis Flex & Steering

3. 5mm Carbon Front Upper Plate (Top Deck)

The top deck handles a massive amount of chassis stress, especially upon landing. Upgrading to a 5mm carbon top deck stiffens the entire front end of the buggy, especiall one with a solid design like Bermco offers.

• The Benefit: Reduces unwanted chassis flex, resulting in much more consistent steering response through high-speed sweepers.

• Shop Now: Bermco 5mm Carbon Front Upper Plate

4. 3mm Carbon Steering Plate

Steering precision is everything in 1/8 scale racing. Factory steering plates can sometimes introduce microscopic flex when your servo is fighting against heavy dirt or deep ruts.

• The Benefit: The rigid 3mm carbon plate completely eliminates flex in the steering assembly, giving you a locked-in, directly connected feel to your front tires.

• Shop Now: Bermco 3mm Carbon Steering Plate

Bulletproofing the Drivetrain

5. 3mm Carbon Center Diff Plate

Your center differential needs to stay perfectly aligned, especially under the extreme torque of a nitro engine or a high-KV 4S brushless system.

• The Benefit: This 3mm carbon plate locks the center diff firmly in place, preventing gear mesh issues during heavy braking and acceleration, while also slightly reducing the overall weight of the center assembly.

• Shop Now: Bermco 3mm Carbon Center Diff Plate

Ready to Upgrade?

Carbon fiber isn't just about the premium look—it's about predictable, repeatable performance on the track. By replacing stamped aluminum or plastic with Bermco RC Parts carbon fiber, you are removing dead weight and adding rigidity exactly where the Kyosho MP11 needs it most.

Check out the full lineup of upgrades and replacement gear directly at Naughty Boy RC. See you at the track!